lolkoproductions.com

Always believe that the computer fan runs continuously? It is also possible that your computer or laptop is warmer than usual. And probably also noticed that its effectiveness has been slower to work, more recently, trying to even the simplest tasks.

Here’s what I noticed on my laptop, only sixteen months. does not simply my way of life, as did several months ago. I have all the usual cleaning tips, you will find anywhere on the Internet, hoping to accelerate the PC with Windows. Ran CCleaner, removing programs, defrag your hard drive, clean my desk, and user profiles, and so on.

Just the same problem. slow computer. He was ready to format the hard drive and reinstall Windows, when I decided that maybe I look around and see things before they began to march. But to my surprise, I found the cause of performance …. A dirty. I could not believe the amount of dust. Now, it is logical that the problems of poor performance.

Over time, your fans to catch the dust, which, obviously, in the components of a computer. Finally, this leads to cooling problems and make your computer run hot, while the decrease in efficiency. As the fan runs continuously and can not be cool, more heat is produced more electricity to operate the facilities, thus reducing overall efficiency.

Worse, it could lead to overheating of components, turn off the computer, or any other element is not left with the repair bills.  It was time to see the inside of a cleaning company. And after it was completed, my laptop was back to his car again soon. Without reinstalling Windows, or spend money. Well, before you go ahead and try to TP cleans your computer, here are some tips on how I configure the computer to clean without damaging the components inside:

First of all the precautions …

• Turn off the computer and unplug – and not doing so could damage your computer and your car. Rest assured that there is no shock that can occur when your computer is connected to another
• Go Away – When cleaning (keep reading for more details), will be surprised at the amount of dust will be a mess. If you can not stop, try another area that you’re not afraid to make an anachronism.
• Keep a vacuum cleaner – vacuum cleaner with static electricity can damage the motherboard. Further damage can occur if the fans do not leave the suction of the fan blades rotating
• Do not use liquid – to avoid all the components inside your computer or printed circuit board other damp or wet.

.. and now it is time for cleaning.

• Use a can of compressed air – it is the right path to your computer. A bottle of compressed air can be found in any electronics store O.
• Make sure you are – as electronic power components Kryptonite. Everything has been done to prevent power

Start with a lid. You can take the compressed air in a vertical position, and start at the top of the computer, then down. Thus, you can sweep all the dust that can harm the components in less time. Again, not a fan blade (CPU fan, power fan, etc.) for review.

However, if you do not press the cables and components. Also keep the source of the air of an average distance between the components of the work. Make sure to clean food, and fly through the internal openings within the housing in order to such an extent that the release of dust at the back.

Then hit the fan in the host (if any) to the dust.

When finished, place the panel back into the computer and connect the mouse, keyboard, screen, etc. Llug the power cord and restart your computer.  According to these simple rules and using common sense, you can dramatically increase the productivity of your computer …. Without spending a fortune

Leave a Reply